Real-time diameter tracking
Track lumen and vessel diameter continuously as pressure, flow or pharmacological conditions change.
Live Tracking Software
MyoVIEW 5 live vessel diameter tracking
MyoVIEW 5 is DMT software for pressure myograph systems, combining live vessel imaging, real-time diameter tracking, pressure readouts and vascular calculations for pressure-diameter, flow and drug-response studies.
Real-time tracking
Live lumen and outer-vessel diameter measurements.
Up to four zones
Multi-zone edge detection for averaged diameter data.
DMT integration
Designed for DMT pressure myograph workflows.
Live
diameter, pressure and vascular-response tracking
Why choose MyoVIEW 5
Gain deeper insight into pressure-diameter relationships
MyoVIEW is designed for researchers who need synchronized vessel imaging, pressure-myograph readouts and quantitative vascular analysis within one experimental workspace.
Advanced edge detection
Use coarse and fine edge-detection controls across up to four user-defined zones for reliable averaged measurements.
Comprehensive vascular metrics
Calculate wall structure, stress, strain, myogenic tone, pressure-diameter relationships and structure ratios.
Pressure and flow integration
Combine vessel diameter with pressure readouts and optional flow, shear-stress and resistance measurements.
Flexible workspace
Organize and save the software layout according to the traces, images and parameters required by the protocol.
Practical data handling
Use built-in calculations, custom functions, experiment markers and export tools for further analysis.
Software overview
Live vessel imaging and pressure-myograph data in one synchronized trace
MyoVIEW pairs the live camera image with edge-detection algorithms and pressure-interface data so vessel geometry, pressure and derived vascular parameters are recorded together.
Researchers can monitor the preparation during the experiment, adjust tracking thresholds, add trace markers and review calculated responses without moving between separate software environments.
Live camera image
Observe vessel position, lumen boundaries and tracking zones
throughout the experiment.
Camera calibration
Calibrate magnification using a stage micrometer and define
the image scale in µm per pixel.
Pressure-interface panel
Monitor pressure and relevant system parameters from the DMT
pressure interface.
Manual tracking option
Use manual measurement tools where automatic edge detection is
not appropriate for the image conditions.
Software views
Tracking, acquisition and analysis in a configurable workspace
MyoVIEW supports both live experiment monitoring and subsequent review of vessel dimensions, pressure-related readouts and derived vascular parameters.
Live tracking and acquisition
Monitor vessel dimensions, tracking zones, pressure-related readouts and experimental traces while the protocol is running.
Analysis and data handling
Review, calculate and export measurements for pressure-diameter, vascular-response and optional flow-related studies.
Live tracking workflow
From camera calibration to vascular-response analysis
MyoVIEW brings the principal pressure-myograph imaging and data steps together in one repeatable software workflow.
Calibrate the image
Calibrate the camera against a stage micrometer and repeat the
calibration whenever magnification changes.
Position tracking zones
Place up to four zones across the vessel image according to the
preparation and measurement objective.
Adjust edge detection
Tune inner and outer thresholds and diameter settings against
the live camera image.
Run the experiment
Record vessel dimensions, pressure and experimental traces as
pressure, flow or drug conditions change.
Analyze and export
Review calculated parameters, create custom functions and
export the required data for reporting or further analysis.
Applications
Pressure, flow and pharmacological vascular studies
MyoVIEW is intended for pressure-myograph experiments where vessel diameter must be interpreted together with controlled pressure, optional flow and pharmacological exposure.
The software is relevant for functional, structural and mechanistic studies of intact tubular preparations.
Pressure-diameter studies
Myogenic tone
Vascular reactivity
Flow-mediated responses
Wall mechanics
Drug-response studies
Vascular remodeling
01
Pressure-diameter relationships
Characterize vessel compliance, distensibility and structural response across controlled pressure steps.
02
Myogenic tone and reactivity
Track active diameter responses during changes in pressure, flow and pharmacological conditions.
03
Wall mechanics
Calculate wall thickness, wall stress, strain, vessel area and media-to-lumen relationships.
04
Flow-mediated studies
Combine MyoVIEW with a compatible FlowMeter configuration for flow, shear-stress and vascular-resistance measurements.
05
Drug-response protocols
Follow diameter and pressure responses during agonist, antagonist and treatment protocols.
Measurements
Live and derived vascular parameters
MyoVIEW supports geometry, pressure and optional flow-related measurements used in pressure-myograph research.
Flow, shear stress and vascular resistance require a compatible
flow configuration. Temperature and longitudinal force depend on
the connected pressure-myograph setup.
Wall structure
Left wall thickness, right wall thickness and average wall
thickness.
Diameter
Live-tracked outer diameter and inner lumen diameter.
Area measurements
Vessel area, lumen area and calculated cross-sectional area.
Pressure readouts
Inlet pressure, outlet pressure and calculated mean pressure.
Structure ratio
Media-to-lumen ratio for assessment of vessel structure and
remodeling.
Mechanical parameters
Wall stress, circumferential strain and custom dynamic
calculation traces.
Optional flow parameters
Flow rate, shear stress and vascular resistance with a
compatible flow setup.
Additional system values
Temperature and longitudinal force where supported by the
connected pressure-myograph system.
Software capabilities
Intelligent tools for precise vascular tracking and analysis
MyoVIEW combines image-based vessel measurement, pressure-myograph readouts and customizable analysis tools.
Multi-zone edge detection
Use up to four tracking zones to generate averaged diameter measurements across selected vessel locations.
Coarse and fine controls
Adjust outer and inner thresholds and diameter limits according to image contrast and vessel-wall appearance.
Live camera calibration
Define magnification and µm-per-pixel scaling using width- or height-based stage-micrometer calibration.
Manual measurement tools
Use manual tracking when automatic edge detection is not suitable for the preparation or image quality.
Custom functions
Build calculated traces for parameters such as circumferential stress and strain.
Sequencer
Support automated multi-step pressure or experiment protocols through the software sequencer.
Experiment markers
Add markers to live traces to document pressure changes, compound additions and experimental events.
Saveable layouts
Organize the workspace around the required camera, trace and parameter views and save the configuration for reuse.
System requirements
Computer and pressure-interface requirements
Confirm the computer, USB connection and pressure-interface firmware before installing MyoVIEW or upgrading an existing pressure-myograph system.
Contact DMT when upgrading older systems or when the existing
pressure interface, firmware or computer configuration is
uncertain.
Operating system
Windows 10 Pro or later
Processor
Modern Intel or AMD CPU, i5 core or later
Memory
8 GB RAM
Recommended screen resolution
1680 × 1050
USB for 110P, 111P and 114P
USB 2.0 or later
USB for 112PP
USB 3.1 or later
Pressure-interface firmware
Version 3.25 or later
Firmware note
Version 3.25 applies to two-part interface configurations
System compatibility
MyoVIEW workflows for DMT pressure myograph systems
MyoVIEW supports DMT pressure-myograph and optional flow workflows. Compatibility should be confirmed when upgrading older systems or combining the software with a specific interface generation.
Pressure Myograph System – 114P
Standard pressure-myograph platform for live diameter, pressure-diameter, myogenic tone and drug-response studies.
View 114PPressure Pulsation Myograph – 112PP
Pulsatile-pressure system for tubular tissue studies requiring controlled pressure waveforms and live vessel tracking.
View 112PPFlowMeter – 162FM
Add ultra-low flow measurement and calculate flow rate, shear stress and vascular resistance alongside vessel diameter.
View FlowMeterResources
MyoVIEW documentation, downloads and compatible systems
Use the confirmed DMT resources below to review software capabilities, download available installers and plan the appropriate pressure-myograph workflow.
MyoVIEW 5 product data sheet
Software overview, workflow, measurements, compatibility and computer requirements.
→Software downloads
Find available DMT software installers and related software resources.
→Pressure myograph systems
Review DMT platforms for pressure, diameter, flow and vascular reactivity studies.
→Pressure Myograph – 114P
Review the standard DMT pressure-myograph context for MyoVIEW.
→Pressure Pulsation Myograph – 112PP
Review pulsatile-pressure workflows for tubular preparations.
→FlowMeter – 162FM
Add flow, shear-stress and vascular-resistance measurements.
→Training and installation
Support pressure-myograph setup, camera calibration and MyoVIEW onboarding.
→Compatibility and upgrade advice
Ask DMT about pressure-interface firmware, camera setup, software upgrades and system compatibility.
→