Custom protocols
Create protocols with up to 50 sections using different frequencies, voltages, pulse widths and timing parameters.
Stimulation Software
MyoPULSE stimulation protocol control
MyoPULSE is controller software for DMT CS4+ and CS8 stimulators. It enables researchers to create, modify, save, load and monitor flexible stimulation protocols with multiple frequencies, voltages, stimulus widths and timing sections.
Up to 50 sections
Build detailed protocols with varying stimulation parameters.
CS4+ and CS8
Software control for DMT four- and eight-channel stimulators.
Real-time progress
Follow protocol position during long stimulation sequences.
50
protocol sections with individual stimulation settings
Why choose MyoPULSE
Flexible stimulation control without losing protocol overview
MyoPULSE is designed for laboratories that need to move beyond simple fixed stimulation settings and create longer, structured and repeatable protocols across one or more stimulation channels.
Easy modification
Add, delete or adjust individual protocol sections without rebuilding the complete stimulation sequence.
Full protocol overview
Review the complete protocol structure in one interface before starting the experiment.
Real-time monitoring
Use the progress bar to see the active protocol position during long or complex stimulation sequences.
Multi-channel loading
Load different stimulation protocols efficiently across multiple stimulator channels when the study requires separate conditions.
Single-twitch flexibility
Configure targeted single-twitch stimulation alongside longer continuous or train-based stimulation workflows.
Software overview
Program, review and monitor the full stimulation sequence
Each protocol can contain multiple stimulation sections with different parameter combinations. Researchers can review the full structure, modify individual sections and follow the protocol during the experiment.
Protocols can be saved and reused, helping standardize stimulation conditions across operators, experimental days and study groups.
Protocol creation
Define frequency, voltage, stimulus width and timing for each
protocol section.
Protocol editing
Add, remove and modify sections as experimental requirements
change.
Protocol reuse
Save and retrieve established stimulation procedures for
repeated studies.
Progress monitoring
Confirm the current stimulation stage during active
experiments.
Software views
A clear workspace for protocol creation and experiment monitoring
The interface is structured around the practical tasks of building, reviewing, loading and running DMT stimulation protocols.
Protocol creation and editing
Configure stimulation sections and adjust frequency, voltage, pulse width and related protocol settings.
Protocol overview and progress
Review the stimulation sequence and monitor progress during longer or more complex experiments.
Stimulation workflow
Build repeatable stimulation procedures for ex vivo studies
MyoPULSE supports muscle, vascular and tissue workflows where controlled electrical input is part of the biological endpoint.
Define parameters
Set voltage, frequency, stimulus width, timing and sequence
structure for the intended biological preparation.
Review protocol
Confirm the complete stimulation sequence before beginning the
experiment.
Assign channels
Load the appropriate protocol into the relevant CS4+ or CS8
channels.
Run and monitor
Start the stimulation protocol and follow its progress in real
time.
Save and repeat
Store validated protocols for future studies, operators and
experimental groups.
Protocol capabilities
Practical tools for simple and advanced stimulation protocols
MyoPULSE combines flexible parameter control with clear protocol visibility and repeatable channel loading.
Up to 50 protocol sections
Build extended protocols with multiple stimulation stages and parameter combinations.
Frequency control
Configure different stimulation frequencies within the same protocol sequence.
Voltage control
Assign appropriate voltage settings to individual stimulation sections.
Stimulus-width control
Adjust pulse width according to the preparation and experimental objective.
Multiple-channel protocols
Load separate protocols across stimulator channels for comparative or multi-condition studies.
Light and dark mode
Select the interface appearance that best fits the laboratory and user preference.
Single-twitch protocols
Support targeted twitch-response studies alongside longer stimulation sequences.
Research-focused interface
The optimized interface is designed around practical stimulation workflows and experimental oversight.
System requirements
Computer requirements for MyoPULSE
Confirm the computer, operating system, USB connection and display requirements before installation or software upgrade.
The requirements below are the specifications currently stated on
the DMT MyoPULSE page. Confirm compatibility with DMT when
upgrading an existing stimulator installation.
Operating system
Windows 10
Processor
Intel Core i5, 3.0 GHz
Storage
256 GB SSD
Memory
8 GB RAM
Network
Fast Gigabit Internet
USB
USB 3.0 port
Recommended resolution
1680 × 1050
Stimulator compatibility
DMT CS4+ and CS8
Compatible stimulators
Select the stimulation channel capacity that matches the workflow
MyoPULSE is designed for DMT CS4+ and CS8 constant-voltage stimulators. The appropriate system depends primarily on the number of stimulation channels required.
Stimulator – CS4+
A compact four-channel constant-voltage stimulator for focused muscle, vascular and tissue stimulation workflows, pilot studies, teaching and protocol development.
View CS4+Stimulator – CS8
An eight-channel stimulation platform for larger multi-preparation workflows and studies requiring additional parallel stimulation capacity.
View CS8Resources
MyoPULSE downloads, stimulators and support
Use the confirmed DMT pages below to review software availability, compatible stimulation hardware and setup support.
Software downloads
Find available DMT software installers and related software resources.
→Stimulator – CS4+
Review the four-channel DMT constant-voltage stimulator.
→Stimulator – CS8
Review the eight-channel DMT stimulation platform.
→MyoDynamics 840MD
Review a DMT muscle strip workflow where stimulation protocols may be relevant.
→Organ Bath System – 820MO
Review organ bath workflows where controlled electrical stimulation may be used.
→Training and installation
Support stimulator setup, software onboarding and protocol workflow training.
→Technical support
Request assistance with software installation, communication or stimulation setup.
→Request software information
Ask DMT about MyoPULSE compatibility, upgrades and stimulator configuration.
→